Concept Guide

2039| show whitelist-db cpsec-master-switch-list Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Sequence Number
The number of times the master controller in the whitelist received and
acknowledged a campus AP whitelist change from the local controller. In the
example above, the master controller received and acknowledged one
campus AP whitelist change from the local controller.
Remote Sequence Number
The number of times that the local controller has received and
acknowledged a campus AP whitelist change from the master controller in
the whitelist. In the example above, the local controller received and
acknowledged three campus AP whitelist updates from the master
controller.
Null Update Count
The number of times the controller has checked its control plane security
whitelist and found nothing to synchronize with the master controller. By
default, the controller compares its control plane security whitelist against
whitelists on other controllers every minute. If the null update count reaches
5, the controller will send an “empty sync” heartbeat to the remote controller
to ensure the sequence numbers on both controllers are the same, then
reset the null update count to zero.
Related Commands
Command Description Mode
whitelist-db cpsec-master-switch-list
Configure the master controller whitelist
for the control plane security feature.
Config
mode
Command History
Version Modification
ArubaOS 5.0 Command introduced
ArubaOS 6.0 The cpsec-master-ctrlr-list parameter was modified to cpsec-master-
switch-list
Command Information
Platforms Licensing Command Mode
All platforms Base operating system. Config mode on local controllers