Concept Guide

show wlan anyspot-profile
show wlan anyspot-profile [<profile-name>]
Description
The output of this command displays configuration settings for a WLAN anyspot profile.
Syntax
Parameter Description
<profile>
Name of an anyspot profile
Usage Guidelines
The anyspot client probe suppression feature decreases network traffic by suppressing probe requests from
clients attempting to locate and connect to other known networks. Issue this command without the <profile>
parameter to display the entire anyspot profile list, including profile status and the number of references to
each profile. Include a profile name to display detailed configuration information for that profile.
Example
The following command displays configuration information for an active (enabled) anyspot profile with two
excluded ESSIDs, and one preset ESSID.
Anyspot profile "default"
-------------------------
Parameter Value
--------- -----
Enable Anyspot true
Exclude ESSID(s) (exact match) corp_dev_1
Exclude ESSID(s) (exact match) corp_voip_1
Exclude ESSID(s) (containing string(s)) N/A
Preset ESSID(s) corpGuest
Parameter Description
enable-anyspot Indicates if the anyspot feature is enabled or disabled.
exclude-essid <exclude-essid> An anyspot-enabled radio will not respond to client probe requests
using an ESSID in the Exclude ESSID lists. ESSIDs from neighboring APs
will automatically appear in this list as long as the anyspot-enabled AP
can detect that ESSID.
exclude-wildcard <exclude-
wildcard>
An anyspot-enabled radio will not respond to client probe requests
using an ESSID that matches a string in the Exclude ESSID (containing
string) list.
preset-essid <preset-essid> If a client sends a probe request without an ESSID (that is, the probe
request is not looking for a specific network) then the anyspot-enabled
AP will respond to the probe request with an ESSID from this list.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show wlan anyspot-profile | 2054