Concept Guide

2109| show wlan ssid-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
802.11g Beacon Rate
The beacon rate for 802.11g (use for
Distributed Antenna System (DAS) only).
Using this parameter in normal operation
may cause connectivity problems.
802.11a Beacon Rate
The beacon rate for 802.11a (use for
Distributed Antenna System (DAS) only).
Using this parameter in normal operation
may cause connectivity problems.
Video Multicast Rate Optimization
The rate for video multicast frames.
Advertise QBSS Load IE
Enables the AP to advertise the QBSS load
element. The element includes the following
parameters that provide information on the
traffic situation:
l Station count: The total number of
stations associated to the QBSS.
l Channel utilization: The percentage of
time (normalized to 255) the channel is
sensed to be busy. The access point
uses either the physical or the virtual
carrier sense mechanism to sense a
busy channel.
l Available admission capacity: The
remaining amount of medium time
(measured as number of 32us/s)
available for a station via explicit
admission control.
The QAP uses these parameters to decide
whether to accept an admission control
request. A wireless station uses these
parameters to choose the appropriate
access points.
Advertise Location Info
APs that are part of this VAP will broadcast
their GPS coordinates in the beacons and
probe response frames as part of a vendor-
specific Information Element.
Advertise AP Name
If this parameter enabled, APs will
broadcast the AP name configured by the
ap-name command. This option is disabled
by default.
802.11r Profile
The associated dot11r-profile with the SSID
profile.
Enforce user vlan for open stations
Shows the strict enforcement of data traffic
only in user's assigned vlan (Open stations
only).