Concept Guide

show wms rules
show wms rules
config
state
summary
Description
Display the internal state and matching information of rules created using the ids ap-classification-rule change
command.
Syntax
Parameter Description
config
Display the following information for each AP classification rule.
l name
l ids
l match-ssid
l min-snr
l max-snr
l min-prcnt
l max-prcnt
l ssids
l enabled
l classify
l conf-incr
l flags
l match-cnt
state
Display the following informatoin for each AP classification rule:
l SSID Match Table
l SSID Exclude Table
l SNR Table
l Probe Count Table
summary
Display an AP classification rules summary.
Usage Guidelines
Issue this command to view existing AP classification rules. AP classification rule configuration is performed
only on a master controller. If AMP is enabled via the mobility-manager command, then processing of the AP
classification rules is disabled on the master controller. A rule is identified by its ASCII character string name (32
characters maximum). The AP classification rules have one of the following specifications:
l SSID of the AP
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show wms rules | 2148