Concept Guide

215| ap system-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
dns-domain
Name of domain that is
resolved by corporate DNS
servers. Use this parameter
when configuring split tunnel.
— —
double-encrypt
This parameter applies only to
remote APs. Use double
encryption for traffic to and
from a wireless client that is
connected to a tunneled SSID.
When enabled, all traffic is re-
encrypted in the IPsec tunnel.
When disabled, the wireless
frame is only encapsulated
inside the IPsec tunnel.
All other types of data traffic
between the controller and
the AP (wired traffic and
traffic from a split-tunneled
SSID) are always encrypted in
the IPsec tunnel.
— disabled
dump-server
(For debugging purposes.)
Specifies the server to receive
a core dump generated when
an AP process crashes.
— —
gre-striping-ip
Specify an IPv4 address for
the 802.11g radio of the
controller to allow LACP
enabled switches to send
traffic for the two controller
radios on different links.
Recommended value for this
parameter is <LMS-IP_
addr>+1.
NOTE: This parameter is
deprecated in ArubaOS
6.4.2.0.
— —
heartbeat-dscp
Define the DSCP value of AP
heartbeats. Use this feature
to prioritize AP heartbeats
and prevent the AP from
losing connectivity with the
controller over high-latency or
low-bandwidth WAN
connections.
0-63 0