Concept Guide

syscontact
syscontact <syscontact>
Description
This command configures the name of the system contact for the controller.
Syntax
Parameter Description
syscontact
An alphanumeric string that specifies the name of the system contact.
Usage Guidelines
Use this command to enter the name of the person who acts as the system contact or administrator for the
controller. You can use a combination of numbers, letters, characters, and spaces to create the name. To
include a space in the name, use quotation marks to enclose the alphanumeric string. For example, to create
the system contact name Lab Technician 1, enter “Lab Technician 1” at the prompt.
To change the existing name, enter the command with a different string. The new name takes affect
immediately. To unconfigure the name, enter “” at the prompt.
Example
The following command defines LabTechnician as the system contact name:
(host) (config) #syscontact LabTechnician
Command History
This command was introduced in ArubaOS 3.1.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide syscontact | 2175