Concept Guide

Table Of Contents
voice real-time-config
voice real-time-config
config-enable
no...
Description
This command enables the controller to analyze the call quality of the voice calls based on the RTP media
streams.
Syntax
Parameter Description Default
config-enable
Enables the controller to analyze the call quality of the voice calls
based on the RTP media streams.
enabled
Usage Guidelines
You can enable the controller to compute and display the call quality parameters such as Jitter, delay, packet
loss, and R-value directly from the RTP media stream of the voice calls. config-enable enables the controller to
analyze the call quality of the voice calls based on the RTP media streams.
Example
The following command enables the controller to analyze the RTP media streams for call quality reports:
(host) (config) #voice real-time-config
(host) (Configure Real-Time Analysis) #config-enable
Command History
Version Description
ArubaOS 6.0 Command introduced.
ArubaOS 6.4.3.0 The default value was changed to enabled.
Command Information
Platforms Licensing Command Mode
All platforms This command requires the
PEFNG license
Config mode on master controller
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide voice real-time-config | 2220