Concept Guide

Table Of Contents
ap wipe out flash
ap wipe out flash
ap-name <ap-name>
ip-addr <ip-addr>
Description
Overwrite the entire AP compact flash, destroying its contents (including the current image file).
Syntax
Parameter Description Range Default
ap-name
Wipe out the flash of the AP with the specified
name.
ip-addr
Wipe out the flash of the AP with the specified IP
address.
Usage Guidelines
Use this command only under the supervision of Dell technical support. If you delete the current image in the
AP’s flash memory, the AP will not function until you reload another image.
Command History
This command was introduced in ArubaOS 3.3.2.
Command Information
Platforms Licensing Command Mode
All platforms running
ArubaOS 3.3.2.x-FIPS or
later.
Base operating system Config mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap wipe out flash | 224