Concept Guide

whitelist-db cpsec purge
whitelist-db cpsec purge
Description
Clear the campus AP whitelist.
Syntax
No parameters.
Usage Guidelines
Use this command to clear all entries in the entire campus AP whitelist. If your network includes both master
and local controllers, then each campus AP whitelist is synchronized across all controllers. If you purge the
entire campus AP whitelist on one controller, that action will clear the campus AP whitelist on every controller in
the network. To delete an individual entry in the campus AP whitelist, use the command whitelist-db cpsec
delete.
Example
The following command remove all APs from the campus AP whitelist:
(host) (config) #whitelist-db cpsec purge
Related Commands
Command Description Mode
show whitelist-db cpsec
Show the campus AP whitelist for the control plane
feature.
Enable mode
Command History
This command was introduced in ArubaOS 5.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system. Config mode on master or local
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide whitelist-db cpsec purge | 2257