Concept Guide

2279| wlan dot11k-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Default
any additional measurements.
l passive—Enables passive beacon measurement mode.
In this mode, the client sets a measurement duration
timer, and, at the end of the measurement duration,
compiles all received beacons or probe response with
the requested SSID and BSSID into a measurement
report.
NOTE: If a station doesn't support the selected
measurement mode, it returns a Beacon Measurement
Report with the Incapable bit set in the Measurement
Report Mode field.
Default Mode: beacon-table
clone <profile-name>
Copy settings from another specified 802.11k profile. —
bcn-req-chan-11a
This value is sent in the 'Channel' field of the beacon
requests on the 'A' radio. You can specify values in the
range 34 to 165.
36
bcn-req-chan-11bg
This value is sent in the 'Channel' field of the Beacon
Requests on the 'BG' radio. You can specify values in the
range 1 to 14.
1
bcn-req-time
This option configures the time duration between two
consecutive beacon requests sent to a dot11K client. By
default, the beacon requests are sent to a dot11K client
every 60 seconds. However, if a different value is required,
the bcn-req-time option can be used.
This permits values in the range from 10 seconds to 200
seconds.
60
seconds
dot11k-enable
Enables the 802.11K feature. This feature is disabled by
default.
Disabled
force-dissasoc
This feature allows the AP to forcefully disassociate “on-
hook” voice clients (clients that are not on a call) after
period of inactivity.
Without the forced disassociation feature, if an AP has
reached its call admission control limits and an on-hook
voice client wants to start a new call, that client may be
denied. If forced disassociation is enabled, those clients
can associate to a neighboring AP that can fulfil their QoS
requirements.
This feature is disabled by default.
Disabled