Concept Guide

2283| wlan dot11r-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
(host) (802.11r Profile "default") #fastbss-mob-domain-id 25
(host) (802.11r Profile "default") #r1key_validity_duration 2500
Configure a mobility domain ID that uniquely identifies a mobility domain using the following command:
(host) (802.11r Profile "default") #mob-domain-id <1-65535>
The default value is 1.
Configure the r1 key timeout value in seconds for decrypt-tunnel or bridge mode using the following
command:
(host) (802.11r Profile "default") #key_duration <60-86400>
The default value is 3600 seconds.
Apply the 802.11r profile to an SSID profile using the following command:
(host) (config) #wlan ssid-profile voice dot11r-profile voice-enterprise
You can advertise the 802.11r capability on the Virtual AP profile by applying the SSID profile. Use the
following command to apply the SSID profile to the Virtual AP profile:
(host) (config) #wlan virtual-ap voice-AP ssid-profile voice
Command History
This command was introduced in ArubaOS 6.3.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system. Config mode on master controllers