Concept Guide

Table Of Contents
2298| wlan hotspot anqp-ip-addr-avail-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
not-available
Network is not available.
no
Remove an existing parameter.
Usage Guidelines
The IP Address Availability information configured using this command provides clients with information about
the availability of IP address versions and types which could be allocated to those clients after they associate to
the hotspot AP.
Values configured in this profile will not be sent to clients unless you:
1. Associate the ANQP IP Address Availability profile with an ANQP advertisement profile. (wlan hotspot
advertisement profile <profile-name> anqp-ip-addr-avail-profile <profile-name> )
2. Associate the ANQP advertisement profile with a Hotspot profile. (wlan hotspot h2-profile
advertisement-profile <profile-name>)
3. Enable the hotspot feature within that Hotspot profile. (wlan hotspot h2-profile <profile-name>
hotspot-enable )
Example
The following command configures an AP using this profile to advertise a public IPv4 network.
wlan hotspot anqp-ip-addr-avail-profile default
ipv4-addr-avail public
ipv6-addr-avail not-available
Command History
This command was introduced in ArubaOS 6.4
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers