Concept Guide

2312| wlan hotspot h2qp-conn-capability-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
udp-ike2-500
Include this parameter to enable the IKEv2. (port 500)
udp-ipsec-vpn
Include this parameter to enable the IPsec VPN port. (ports 500, 4500 and 0)
no
Negates any existing parameter, returning it to its default disabled value.
udp-voip
Include this parameter to enable the UDP VoIP port. (port 5060)
Usage Guidelines
The values configured in this profile can be sent in an ANQP IE to provide hotspot clients information about the
IP protocols and associated port numbers that are available and open for communication.
Values configured in this profile will not be sent to clients unless you:
1. Associate the H2QP profile with an ANQP advertisement profile. (wlan hotspot advertisement profile
<profile-name> h2qp-conn-cap-profile <profile-name> )
2. Associate the ANQP advertisement profile with a Hotspot profile. (wlan hotspot h2-profile
advertisement-profile <profile-name> )
3. Enable the hotspot feature within that Hotspot profile. (wlan hotspot h2-profile <profile-name>
hotspot-enable )
Example
The following example allows the H2QP connection capability profile to advertise the availability of ICMP, HTTP
and VOIP ports.
(host) (config)# wlan hotspot h2qp-conn-capability-profile Wan1
icmp
http
voip
enable
Command History
This command was introduced in ArubaOS 6.4
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers