Concept Guide

Table Of Contents
2330| wlan ht-ssid-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
clone
Name of an existing high-throughput SSID
profile from which parameter values are
copied.
high-throughput-enable
Enable or disable high-throughput SSID to
allow high-throughput (802.11n) stations to
associate.
Enabling high-throughput in an ht-ssid-
profile enables Wi-Fi Multimedia (WMM)
base features for the associated SSID.
enabled
ldpc
If enabled, the AP will advertise Low-
Density Parity Check (LDPC) support. LDPC
improves data transmission over radio
channels with high levels of background
noise.
enabled
legacy-stations
Control whether or not legacy (non-HT)
stations are allowed to associate with this
SSID. By default, legacy stations are
allowed to associate.
This setting has no effect on a BSS in which
HT support is not available.
enabled
max-rx-a-mpdu-
size
Control the maximum size, in bytes, of an
Aggregated-MAC Packet Data Unit (A-
MPDU) that can be received on this high-
throughput SSID.
8191
16383
32767
65535
65535
8191
Maximum size of 8191 bytes.
16383
Maximum size of 16383 bytes.
32767
Maximum size of 32767 bytes.
65535
Maximum size of 65535 bytes.
max-tx-a-mpdu-
size
Control the maximum size, in bytes, of an
A-MPDU that can be sent on this high-
throughput SSID.
1576-
65535
65535
max-tx-a-masdu-count-be
Set the maximum number of MSDUs in a
TX A-MSDU on best effort AC.
NOTE: In tunnel and decrypt-tunnel
forwarding mode, TX A-MSDU is disabled if
the value is set to 0. If the value is set to
non-zero, TX A-MSDU is enabled and set to
this value.
0-15 2