Concept Guide

Parameter Description
multi-controller message exchanges.
l query — Clears statistics maintained in the user and
server table.
l service — Clears statistics maintained in the AirGroup
service table.
user
l Mac Address - Clears the AirGroup server Mac
addresses.
l dlna - Clears the AirGroup DLNA users.
l mdns - Clears the AirGroup mDNS users.
l all - Removes the current AirGroup user entries from the
user table.
ap
Clear all AP related information.
arm bandwidth-management
Clears AP bandwidth management table counters. An AP can
be specified by ap-name, BSSID, IPv4 address, or IPv6
address.
arm client-match
summary — Clears the client match summary information
unsupported — Clears the MAC address of an unsteerable
client or clients.
crash-info
Clears AP crash information. An AP can be specified by ap-
name, IPv4 address, or IPv6 address.
debug
l bss-dmo-stats— Clears DMO debug statistics from a
specific BSSID of an AP.
l client-stats— Clears statistics from a client.
l dot11r {efficiency-stat}— Clears 802.11r related stats.
l lacp— Clears transmitted and received packet counters
displayed in the show ap debug lacp command.
l lldp— Clears Link Layer Discovery Protocol.
l radio-stats— Clears aggregate radio debug statistics of
an AP.
mesh
Clear all mesh commands.
port
Toggle the link on the specified port.
remote flash-config
Clears the flash configuration from a specified AP. An AP can
be specified by ap-name, BSSID, IPv4 address, or IPv6
address.
arm
Clear the following types of ARM client match information
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide clear | 267