Concept Guide

295| copy Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
system: partition [0|1]
Specify the system partition to save the file.
running-config
Copy the active, running configuration to a specified destination.
flash:
Copy the configuration to the flash file system.
<filename>
Specify the new name of the copied configuration file.
ftp:
Using FTP, copy the configuration to an FTP server.
NOTE: Using this parameter, a password is required to access the FTP
server. The password is masked, and must be entered in a separate line.
<ftphost>
Specify the IP address of the FTP server.
<user>
User account name required to access the FTP server.
<remote-dir>
Specify a remote directory, if needed.
startup-config
Copy the active, running configuration to the start-up configuration.
tftp:
Using TFTP, copy the configuration to a TFTP server
<tftphost>
Specify the IP address or hostname of the TFTP server.
scp:
Copy an ArubaOS image file or file from the flash file system using the
Secure Copy protocol. The SCP server or remote host must support SSH
version 2 protocol.
<scphost>
Specify the IP address of the SCP server or remote host.
<username>
User account name required to access the SCP server or remote host.
<filename>
Specify the absolute path of the filename to be copied.
flash:
Copy the file to the flash file system.
<destfilename>
Specify the new name of the copied file.
system:
Copy the file to the system partition.
startup-config
Copy the startup configuration to a specified flash file or to a TFTP
server.
flash:
Copy the file to the flash file system.