Concept Guide

Parameter Description
l v1: IKEv1
l v2: IKEv2
Usage Guidelines
To define settings for a ISAKMP policy, issue the command crypto isakmp policy <priority> then press
Enter. The CLI will enter config-isakmp mode, which allows you to configure the policy values.
Example
The following command configures an ISAKMP peer IP address and subnet mask.. After configuring an ISAKMP
address and netmask, you will be prompted to enter the IKE preshared key.
(host)(config) #crypto isakmp policy1
(host)(config-isakmp) #auth rsa-sig
Key:*******Re-Type Key:*******
Command History
Release Modification
ArubaOS 3.0 Command introduced.
ArubaOS 6.1 The following parameters were introduced.
l authentication ecdsa-256
l authentication ecdsa-384
l hash sha1-96
l hash sha2-256-128
l hash sha2-384-192
l prf
ArubaOS 6.3 The Diffie-Hellman group 14 parameter was introduced.
ArubaOS 6.4 The disable/enable and no parameters were introduced.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide crypto isakmp policy | 311