Concept Guide

crypto-local isakmp allow-via-subnet-routes
crypto-local isakmp allow-via-subnet-routes
Description
This command enables the controller to accept the subnets published by VIA clients.
Syntax
Parameter Description
allow-via-subnet-routes
Allows the controller to accept VIA-published subnets.
Usage Guidelines
By default, this feature is disabled, which means that the controller will ignore the subnets published by VIA.
Enable this feature using the crypto-local isakmp allow-via-subnet-routes command. To disable the
feature, execute the no crypto-local isakmp allow-via-subnet-routes command.
Example
Execute this command to allow the controller to accept VIA-published subnets:
(host)(config) #crypto-local isakmp allow-via-subnet-routes
Related Commands
Command Description Mode
show crypto-local isakmp
allow-via-subnet-routes
Use this command to know if the controller is
configured to accept subnet routes from VIA
clients.
Config mode
Command History
Release Modification
ArubaOS 6.5 Command introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide crypto-local isakmp allow-via-subnet-routes | 321