Concept Guide

Table Of Contents
crypto-local isakmp xauth
crypto-local isakmp xauth
Description
This command enables IKE XAuth for VPN clients.
Syntax
No parameters.
Usage Guidelines
The no crypto-local isakmp xauth command disables IKE XAuth for VPN clients. This command only applies
to VPN clients that use certificates for IKE authentication. If you disable XAuth, then a VPN client that uses
certificates will not be authenticated using username/password. You must disable XAuth for Cisco VPN clients
using CAC Smart Cards.
Example
This command disables IKE XAuth for Cisco VPN clients using CAC Smart Cards:
no crypto-local isakmp xauth
Command History
This command was introduced in ArubaOS 3.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master and local
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide crypto-local isakmp xauth | 332