Concept Guide

Table Of Contents
database synchronize
database synchronize period <minutes>|captive-portal-custom
Description
This command manually synchronizes the database between a pair of redundant master controllers
Syntax
Parameter Description
captive-portal custom
Includes custom captive portal files..
period
Configures the interval for automatic database synchronization.
<minutes>
Interval in minutes. Range is 1 25200 minutes.
Usage Guidelines
This command takes effect immediately. If a peer is not configured, the controller displays an error message.
Use the database synchronize period command in config mode to configure the interval for automatic
database synchronization. Use the database synchronize rf-plan-data command to include RF plan data
when synchronizing in standby mode.
Example
The following commands cause the database on the active master controller to synchronize with the standby
in 25 minute intervals. The synchronization includes RF plan data.
(host) (config) #database synchronize period 25
Command History
Version Description
ArubaOS 3.0 Command introduced.
ArubaOS 6.3 The captive-portal-custom parameter was introduced.
The rf-plan-data parameter was deprecated.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config modes on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide database synchronize | 344