Concept Guide

Table Of Contents
ipv6 cp-redirect-address
ipv6 cp-redirect-address <ip6addr> | disable
Description
This command configures a redirect address for captive portal.
Syntax
Parameter Description
<ip6addr>
This address should be routable from all external networks.
disable
Disables automatic DNS resolution for captive portal.
Usage Guidelines
This command redirects wireless clients that are on different VLANs (from the controller’s IP address) to the
captive portal on the controller.
If you have the Next Generation Policy Enforcement Firewall (PEFNG) license installed in the controller, modify
the captive portal session ACL to permit HTTP/S traffic to the destination cp-redirect-address <ip6addr>
instead of mswitch. If you do not have the PEFNG license installed in the controller, the implicit captive-portal-
profile ACL is automatically modified when you issue this command.
Example
The following command configures a captive portal redirect address:
(host) (config) #ipv6 cp-redirect-address
Command History
Introduced in ArubaOS 6.1
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating
system
Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ipv6 cp-redirect-address | 542