Concept Guide

location
location <string>
Description
This command configures the location of the controller.
Syntax
Parameter Description
location
A text string that specifies the system location.
Usage Guidelines
Use this command to indicate the location of the controller. You can use a combination of numbers, letters,
characters, and spaces to create the name. To include a space in the name, use quotation marks to enclose the
text string.
To change the existing name, enter the command with a different string. To unconfigure the location, enter “”
at the prompt.
Example
The following command configures the location:
(host) (config) #location “Building 10, second floor, room 21E”
Command History
Introduced in ArubaOS 3.0
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide location | 601