Concept Guide

Table Of Contents
ntp standalone
ntp standalone vlan-range <value of vlan range>
Description
This command enables/disables controller to act as NTP server.
Syntax
Parameter Description Default
<value of vlan range>
String representing vlan range (for example, 1,2,6-7).
Maximum VLANS supported is 16.
Usage Guidelines
NTPstandalone feature enables a controller to act as an NTP server so that the devices that do not have access
to internet can synchronize their clocks.
Example
The following command enables the controller to act as an NTP server.
(host) (config) #ntp standalone vlan-range 1
Command History
Release Modification
ArubaOS 6.5 Command introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system. Config mode on master controllers.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ntp standalone | 641