Concept Guide

rf am-scan-profile
<profile-name>
clone <profile>
dwell-time-active-channel
dwell-time-other-reg-domain-channel
dwell-time-rare-channel
dwell-time-reg-domain-channel
no
scan-mode
Description
Configure an Air Monitor (AM) scanning profile.
Syntax
Parameter Description Range Default
<profile-name>
Name of this instance of the
profile.
1-63
characters
—
clone <profile>
Copy data from another AM
scanning profile
— —
dwell-time-active-channel
Dwell time (in ms) for
channels where there is
wireless activity.
100-32768
ms
500 ms
dwell-time-other-reg-domain-channel
Dwell time (in ms) for
channels not in the APs
regulatory domain.
100-32768
ms
250 ms
dwell-time-rare-channel
Dwell time (in ms) for rare
channels.
100-32768
ms
100 ms
dwell-time-reg-domain-channel
Dwell time (in ms ) for AP's
Regulatory domain channels
100-32768
ms
250 ms
no
Delete the command — —
scan-mode
Set the scanning mode for
the radio.
— —
all-reg-domain
Scan channels in all
regulatory domain
— —
rare
Scan all channels (all
regulatory domains and rare
channels)
— —
reg-domain
Scan channels in the APs
regulatory domain
— —
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide rf am-scan-profile | 710