Concept Guide

717| rf arm-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
maintain
Maintains existing channel
assignments.
— —
multi-band
Computes ARM assignments
for both 5 GHZ (802.11a) and
2.4 GHZ (802.11b/g)
frequency bands.
— —
single-band
Computes ARM assignments
for a single band.
— —
backoff-time
Time, in seconds, an AP
backs off after requesting a
new channel or power.
120-3600 240 sec
cellular-handoff
-assist
When both the client match
and cellular handoff assist
features are enabled, the
cellular handoff assist
feature can help a dual-
mode, 3G/4G-capable Wi-Fi
device such as an iPhone,
iPad, or Android client at the
edge of Wi-Fi network
coverage switch from Wi-Fi
to an alternate 3G/4G radio
that provides better network
access. This feature is
disabled by default, and is
recommended only for Wi-Fi
hotspot deployments.
— disabled
channel-quality
-aware-arm
Enable this feature to base
ARM changes upon an
internally calculated channel
quality metric. When this
feature is disabled, ARM
initiates channel changes
based on thresholds defined
in this profile, and chooses
the channel based on the
calculated interference index
value. Default: Disabled
— disabled
channel-quality
-threshold
Channel quality percentage
below which ARM initiates a
channel change.
0-100 70
channel-quality
-wait-time
If channel quality is below the
specified channel quality
threshold for this wait time
period, ARM initiates a
channel change.
1-3600 120