Concept Guide

719| rf arm-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
cm-lb-client-thresh
<#-of-clients>
If an APradio has fewer
clients than the client match
load balancing threshold
defined by this parameter,
the AP will not participate in
load balancing.
0-100
clients
30
cm-lb-signal
-delta
Client match will not move a
client to a new radio if the
signal strength of the target
AP is this dB value lower than
the radio to which the client
is currently associated. This
parameter works differently
than the cm-lb-snr-thresh
value, which imposes a
definite value on the target
AP's signal-to-noise radio.
the cm-lb-signal-delta
parameter imposes a
relative constraint based
upon the signal strength of
the radio to which the client
is currently associated.
0-20 dB 5 dB
cm-lb-snr-thresh
<dB>
Clients must detect a SNR
from an underutilized AP
radio at or above this
threshold before the client
match feature considers load
balancing a client to that
radio.
0-100 dB 25
cm-lb-thresh
<%-of-clients>
When the client match
feature is enabled, clients
may be steered from a highly
utilized channel on an AP to a
channel with fewer clients. If
a channel on an APradio has
this percentage fewer clients
than another channel
supported by the client, the
client match feature may
move clients from the busier
channel to the channel with
fewer clients.
0-100 % 20