Concept Guide

736| rf dot11a-radio-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
l Disable mode: This mode does not
support the tuning of the CCA Detect
Threshold.
channel-reuse-threshold
RX Sensitivity Tuning Based Channel
Reuse Threshold, in - dBm.
If the Rx Sensitivity Tuning Based Channel
reuse feature is set to static mode, this
parameter manually sets the AP’s Rx
sensitivity threshold (in -dBm). The AP will
filter out and ignore weak signals that are
below the channel threshold signal
strength.
If the value is set to zero, the feature will
automatically determine an appropriate
threshold.
Depends on
regulatory
domain
—
client-match
The ARM client match feature continually
monitors a client's RF neighborhood to
provide ongoing client bandsteering and
load balancing, and enhanced AP
reassignment for roaming mobile clients.
This feature is recommended over the
legacy bandsteering and spectrum load
balancing features, which, unlike client
match, do not trigger AP changes for
clients already associated to an AP.
When this feature is enabled on an AP,
that AP is responsible for measuring the
RF health of its associated clients. The
APreceives and collects information about
clients in its neighborhood, and
periodically sends this information to the
controller. The controller aggregates
information it receives from all APs using
client match, and maintains information
for all associated clients in a database.
The controller shares this database with
the APs (for their associated clients) and
the APs use the information to compute
the client-based RF neighborhood and
determine which APs should be
considered candidate APs for each client.
When the controller receives a client steer
request from an AP, the controller
identifies the optimal APcandidate and
manages the client’s relocation to the
desired radio. This is an improvement
from previous releases, where the
ARMfeature was managed exclusively by
APs, the without the larger perspective of
the client's RFneighborhood
— Disabled
clone
Name of an existing radio profile from
which parameter values are copied.
— —