Concept Guide

740| rf dot11a-radio-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
spectrum load balancing domain isalso
defined, AP radios belonging to the
same spectrum load balancing domain
will be considered part of the same RF
neighborhood for load balancing, and
will not recognize RF neighborhoods
defined by the ARM feature.
spectrum-load-
balancing
The Spectrum Load Balancing feature
helps optimize network resources by
balancing clients across channels,
regardless of whether the AP or the
controller is responding to the wireless
clients' probe requests.
If enabled, the controller compares
whether or not an AP has more clients
than its neighboring APs on other
channels. If an AP’s client load is at or over
a predetermined threshold as compared
to its immediate neighbors, or if a
neighboring Dell AP on another channel
does not have any clients, load balancing
will be enabled on that AP. This feature is
disabled by default.
— disabled
spectrum-monitoring
Issue this command to turn APs in ap-
mode into a hybrid AP. An AP in hybrid AP
mode will continue to serve clients as an
access point while it scans and analyzes
spectrum analysis data for a single radio
channel.
For further details on using hybrid APs and
spectrum monitors to examine the radio
frequency (RF) environment in which the
Wi-Fi network is operating, refer to the
Spectrum Analysis chapter of the Dell
Networking W-Series ArubaOS User
Guide.
For a list of APs that can be converted into
a spectrum monitor or hybrid AP, refer to
the Spectrum Analysis chapter of the Dell
Networking W-Dell Networking W-Series
ArubaOS 6.5.x User Guide.
— default
spectrum-profile
<profile>
Specify the rf spectrum profile used by
hybrid APs and spectrum monitors. This
profile sets the spectrum band and device
ageout times used by a spectrum monitor
or hybrid AP radio. For details, see rf
spectrum-profile on page 766.
— default