Concept Guide

Command History
Release Modification
ArubaOS 3.0 Command introduced.
ArubaOS 3.3.2 Introduced support for the high-throughput IEEE 802.11n standard.
ArubaOS 3.4 The following parameters were introduced:
l Spectrum load balancing
l Spectrum load balancing domain
l RX Sensitivity Tuning Based Channel Reuse
l RX Sensitivity Threshold
l ARM/WIDS Override
ArubaOS 3.4.1 The maximum-distance parameter was introduced.
ArubaOS 3.4.2 The beacon-regulate parameter was introduced.
ArubaOS 6.0 The following parameters were introduced:
l am-scan-profile
l cap-reg-eirp
l slb-mode
l slb-update-interval
ArubaOS 6.1 The spectrum-monitoring and slb-threshold parameters were
introduced.
ArubaOS 6.1.3.2 The cell-size-reduction parameter was introduced.
ArubaOS 6.3 The very-high-throughput-enable parameter was introduced.
ArubaOS 6.4.2.10,
ArubaOS 6.4.3.3
The spur-immunity parameter was introduced.
ArubaOS 6.5 The upper limit for the beacon-period parameter was set to 2000
milliseconds.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide rf dot11a-radio-profile | 743