Concept Guide

749| rf dot11g-radio-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
of the CCA Detect
Threshold.
channel-reuse-threshold
RX Sensitivity Tuning Based
Channel Reuse Threshold, in -
dBm.
If the Rx Sensitivity Tuning
Based Channel reuse feature is
set to static mode, this
parameter manually sets the
AP’s Rx sensitivity threshold (in
-dBm). The AP will filter out and
ignore weak signals that are
below the channel threshold
signal strength.
If the value is set to zero, the
feature will automatically
determine an appropriate
threshold.
depends on
regulatory
domain
—
disable-arm-wids-function
Disables Adaptive Radio
Management (ARM) and
Wireless IDS functions. These
can be disabled if a small
increase in packet processing
performance is desired. If a
radio is configured to operate
in Air Monitor mode, then
these functions are always
enabled irrespective of this
option.
CAUTION: Use this parameter
with caution. Enabling this
parameter effectively disables
ARM and WIDS.
— OFF
dot11b-protection
Enable or disable protection for
802.11b clients. This
parameter is enabled by
default. Disabling this feature
may improve performance if
there are no 802.11b clients on
the WLAN.
WARNING: Disabling protection
violates the 802.11 standard
and may cause interoperability
issues. If this feature is
disabled on a WLAN with
802.11b clients, the 802.11b
clients will not detect an
802.11g client talking and can
potentially transmit at the
same time, thus garbling both
frames.
— enabled