Concept Guide

782| show aaa authentication captive-portal Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Use HTTP for authentication Disabled
Logon wait minimum wait 5 sec
Logon wait maximum wait 10 sec
logon wait CPU utilization threshold 60 %
Max Authentication failures 0
Show FQDN Disabled
Authentication Protocol PAP
Login page /auth/index.
Welcome page /auth/welcom
Show Welcome Page Yes
Add switch IP address in the redirection URL Disabled
Adding user vlan in redirection URL Disabled
Add a controller interface in the redirection URL N/A
Allow only one active user session Disabled
White List N/A
Black List N/A
Show the acceptable use policy page Disabled
User idle timeout N/A
Redirect URL N/A
Bypass Apple Captive Network Assistant Disabled
URL Hash Key ********
The output of this command includes the following parameters:
Parameter Description
Default Role
Role assigned to the captive portal user
upon login.
Default Guest Role
Guest role assigned to the captive portal
user upon login.
Server Group
Name of the group of servers used to
authenticate captive portal users.
Redirect Pause
Time, in seconds, that the system remains
in the initial welcome page before
redirecting the user to the final web URL. If
set to 0, the welcome page displays until
the user clicks on the indicated link.
User Login
Shows whether the profile has enabled or
disabled captive portal with authentication
of user credentials.
Guest Login
Shows whether the profile has enabled or
disabled captive portal guest login without
authentication.
Logout popup window
Shows whether the profile has enabled or
disabled a pop-up window that allows a
user to log out. If this is disabled, the user
remains logged in until the user timeout
period has
elapsed or the station resets.