Concept Guide

Table Of Contents
809| show aaa authentication via connection-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
VIA IPsec Crypto Map List of IPsec Crypto Map that the VIA client uses to connect to the controller.
These IPsec Crypto Maps are configured in CLI using the crypto-local
ipsec-map <ipsec-map-name> command.
Allow user to save
passwords
Enable or disable users to save passwords entered in VIA.
Default: Enabled
Enable Supplicant If enabled, VIA starts in bSec mode using L2 suite-b cryptography. This option
is disabled by default.
Enable FIPS Module Shows if the VIA(Federal Information Processing Standard) FIPS module is
enabled, so VIA checks for FIPS compliance during startup. This option is
disabled by default.
Auto-Launch Supplicant Select this option to automatically connect to a configured WLAN network.
Lockdown All Settings If enabled, all user options on the VIA client are disabled.
Domain Suffix in VIA
Authentication
Enables a domain suffix on VIA Authentication, so client credentials are sent
as domainname\username instead of just username.
Enable Controllers Load
Balance
This option allows the VIA client to failover to the next available selected
randomly from the list as configured in the VIA Servers option. If disabled, VIA
will failover to the next in the sequence of ordered list of VIA Servers.
Enable Domain Pre-
Connect
This option allows users with lost or expired passwords to establish a VIA
connection to corporate network. This option authenticates the user’s device
and establishes a VIA connection that allows users to reset credentials and
continue with corporate access.
VIA Banner Reappearance
Timeout
The maximum time (in minutes) allowed before the VIA login banner
reappears. Default: 1440 min
VIA Client Network Mask The network mask that has to be set on the client after the VPN connection is
established.
Default: 255.255.255.255
Validate Server Certificate Enable or disable VIA from validating the server certificate presented by the
controller.
Default: Enabled
VIA Client DNS Suffix List The DNS suffix list (comma separated) that has be set on the client once the
VPN connection is established.
Default: None.
VIA max session timeout The maximum time (minutes) allowed before the VIA session is
disconnected.