Concept Guide

Parameter Description
Device Type Classification Shows if the device identification feature is enabled or
disabled. When devtype-classification parameter is
enabled, the output of the show user and show user-table
commands shows each client’s device type, if that client
device can be identified.
Enforce DHCP When this option is enabled, clients must complete a DHCP
exchange to obtain an IP address. Best practices are to
enable this option when you use the aaa derivation-rules
command to create a rule with the DHCP-Option rule
type. This parameter is disabled by default.
PAN firewall Integration Displays the status of the PAN firewall integration.
Open SSID Radius Accounting Displays the Open system SSID RADIUS accounting status.
Related Commands
Command Description Mode
aaa profile
Use the command aaa profile to define AAA
profiles.
Config mode
Command History
This command was introduced in ArubaOS 3.0.
Command History
Version Description
ArubaOS 3.0 Command introduced.
ArubaOS 3.4.1 License requirements changed in ArubaOS 3.4.1, so the sip-
authentication-role parameter required the Policy Enforcement Firewall
license instead of the Voice Services Module license required in earlier
versions.
ArubaOS 6.1 The radius-interim-accounting, devtype-classification and enforce-
dhcp parameters were introduced.
ArubaOS 6.3 The user-idle-timeout parameter was introduced.
ArubaOS 6.4 The multiple-server-accounting, PAN_firewall-integration and down-
load-role parameters were introduced.
ArubaOS 6.4.3 The open ssid radius accounting parameter was introduced.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show aaa profile | 856