Concept Guide

show acl acl-table
show acl acl-table <1-2700>
Description
Display information for a specified access control list (ACL).
Syntax
Parameter Description
acl-table <1-2700>
Specify the number of the ACL for which you want to view information.
Example
The following example displays the ACL table for the controller.
(host) #show acl acl-table acl 1
AclTable
--------
ACL Type ACE Index Ace Count Name Applied
--- ---- --------- --------- ---- -------
1 role 1459 18 logon 0
Total free ACE entries = 3591
Free ACE entries at the bottom = 2552
Next ACE entry to use = 1480 (table 1)
Ace entries reused 622 times
ACL count 64, tunnel acl 0
Ace entries reused 373 times
ACL count 64, tunnel acl 0
The output of this command displays the following parameters:
Parameter Description
ACL Number of the specified ACL
Type Shows the ACL type:
l role: Access list is used to define a user role.
l mac: MAC ACLs allow filtering of non-IP traffic. This ACL filters on a
specific source MAC address or range of MAC addresses.
l session: Session ACLs define traffic and firewall policies on the
controller.
l ether-type: This type of ACL filters on the Ethertype field in the
Ethernet frame header, and is useful when filtering non-IP traffic on a
physical port.
l standard: Standard ACLs are supported for compatibility with router
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show acl acl-table | 890