Concept Guide

show airgroup multi-controller-table
show airgroup multi-controller-table [mdns|dlna] [verbose]
Description
This command displays the IP address of all the controllers participating in an AirGroup multi-controller
environment.
Syntax
Parameter Description Range Default
mdns
Displays the mDNS statistics. — —
dlna
Displays the DLNA statistics. — —
verbose
Displays additional information in a tabular
format.
— —
Example
All controllers communicate with each other based on the multi-controller table in an AirGroup cluster. This
table is a combination of controllers specified in each domain, as part of active-domains. Use the following
command to view the IP address of all the controllers participating in an AirGroup multi-controller
environment:
(host) (config) #show airgroup multi-controller-table
AirGroup Multi-Controller-Table
---------------------------------------
IP-Address Type Request with Tag Tx Unicast Response with tag Tx Raw Response Tx
Request with Tag Rx Unicast Response with tag Rx Raw Response Rx
---------- ---- ------------------- ---------------------------- --------------- ------
------------- ---------------------------- ---------------
10.15.121.240 mDNS 43 0 0 0
0 0
10.15.121.240 mDNS 43 0 0 0
0 0
Num IP-Address:2
The output of this command includes the following parameters:
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show airgroup multi-controller-table | 923