Concept Guide

102 | Wireless Network Profiles Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
(Instant AP)(SSID Profile <name>)# wmm-video-share <share>
(Instant AP)(SSID Profile <name>)# wmm-voice-dscp <dscp>
(Instant AP)(SSID Profile <name>)# wmm-voice-share <share>
(Instant AP)(SSID Profile <name>)# rf-band {<2.4>|<5.0>|<all>}
(Instant AP)(SSID Profile <name>)# content-filtering
(Instant AP)(SSID Profile <name>)# hide-ssid
(Instant AP)(SSID Profile <name>)# inactivity-timeout <interval>
(Instant AP)(SSID Profile <name>)# work-without-uplink
(Instant AP)(SSID Profile <name>)# local-probe-req-thresh <threshold>
(Instant AP)(SSID Profile <name>)# max-clients-threshold <number-of-clients>
(Instant AP)(SSID Profile <name>)# essid <ESSID>
(Instant AP)(SSID Profile <name>)# end
(Instant AP)# commit apply
Configuring VLAN Settings for a WLAN SSID Profile
If you are creating a new SSID profile, complete the WLANSettings procedure before configuring VLAN. For
more information, see Configuring WLAN Settings for an SSID Profile on page 98.
You can configure VLAN settings for an SSID profile using the Instant UI or CLI.
In the Instant UI
To configure VLAN settings for an SSID:
1. In the VLAN tab of the New WLAN window, perform the following steps. The following figure displays the
contents of the VLAN tab.
Figure 28 VLAN Tab
2. Select any for the following options for Client IP assignment:
l Virtual Controller assigned—On selecting this option, the client obtains the IP address from the
Virtual Controller.
l Network assigned—On selecting this option, the IP address is obtained from the network.