Concept Guide

a. Select any of the following types of access control:
l Role-based— Allows the users to obtain access based on the roles assigned to them.
l Unrestricted— Allows the users to obtain unrestricted access on the port.
l Network-based— Allows the users to be authenticated based on access rules specified for a
network.
b. If the Role-based access control is selected, perform the following steps:
l Under Roles, select an existing role for which you want to apply the access rules, or click New and
add the required role. The list of roles defined for all networks is displayed under Roles.
The default role with the same name as the network, is automatically defined for each network. The default
roles cannot be modified or deleted.
l Select the access rule associated with a specific role and modify if required. To add a new access rule,
click New in the Access Rules window. You can configure up to 64 access rules. For more
information on configuring access rules, see Configuring ACL Rules for Network Services on page 189.
l Configure rules to assign roles for an authenticated client. You can also configure rules to derive
VLANs for the wired network profile. For more information on role assignment rules and VLAN
derivation rules, see Configuring Derivation Rules on page 206 and Configuring VLAN Derivation
Rules on page 211.
l Select the Assign pre-authentication role checkbox to add a pre-authentication role that allows
some access to the users before the client authentication.
l Select the Enforce Machine Authentication checkbox, to configure access rights to clients based
on whether the client device supports machine authentication. Select the Machine auth only and
User auth only rules. Machine Authentication is only supported on Windows devices and devices
such as iPads.
If Enforce Machine Authentication is enabled, both the device and the user must be
authenticated for the role assignment rule to apply.
2. Click Finish.
In the CLI
To configure access rules for a wired profile:
(Instant AP)(config)# wired-port-profile <name>
(Instant AP)(wired ap profile <name>)# access-rule-name <name>
(Instant AP)(wired ap profile <name>)# end
(Instant AP)# commit apply
To configure role assignment rules:
(Instant AP)(config)# wired-port-profile <name>
(Instant AP)(wired ap profile <name>)# set-role <attribute>{{equals| not-equal| starts-with|
ends-with| contains| matches-regular-expression}<operator> <role>| value-of}
(Instant AP)(wired ap profile <name>)# end
(Instant AP)# commit apply
To configure a pre-authentication role:
(Instant AP)(config)# wired-port-profile <name>
(Instant AP)(wired ap profile <name>)# set-role-pre-auth <role>
(Instant AP)(wired ap profile <name>)# end
(Instant AP)# commit apply
To configure machine and user authentication roles:
(Instant AP)(config)# wired-port-profile <name>
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Wired Profiles | 123