Concept Guide

In the CLI
To enable content filtering on a WLAN SSID:
(Instant AP)(config)# wlan ssid-profile <name>
(Instant AP)(SSID Profile <name>)# content-filtering
(Instant AP)(SSID Profile <name>)# end
(Instant AP)# commit apply
Enabling Content Filtering for a Wired Profile
To enable content filtering for a wired profile, perform the following steps:
In the Instant UI
1. Click the Wired link under More at the top right corner of the main window. The Wired window is
displayed.
2. In the Wired window, select the wired profile to modify.
3. Click Edit. The Edit Wired Network window is displayed.
4. In the Wired Settings tab, select Enabled from the Content Filtering drop-down list and click Next to
continue.
In the CLI
To enable content filtering for a wired profile in the CLI:
(Instant AP)(config)# wired-port-profile test
(Instant AP)(wired ap profile <name>)# content-filtering
(Instant AP)(wired ap profile <name>)# end
(Instant AP)# commit apply
Configuring Enterprise Domains
The enterprise domain names list displays the DNS domain names that are valid on the enterprise network.
This list is used to determine how client DNS requests must be routed. When Content Filtering is enabled, the
DNS request of the clients is verified and the domain names that do not match the names in the list are sent to
the open DNS server.
You can configure an enterprise domain through the Instant UI or CLI.
In the Instant UI
To manually add a domain:
1. Navigate to System > General, click Show advanced options > Enterprise Domains. The Enterprise
Domain tab contents are displayed.
2. Click New and enter a New Domain Name. Using “*” as an enterprise domain causes all DNS traffic to go
through the tunnel to the original DNS server of clients. If you are configuring routing profile with split-
tunnel disabled, you need add “*” to the enterprise domain list.
3. Click OK to apply the changes.
To delete a domain, select the domain and click Delete to remove the domain name from the list.
In the CLI
To configure an enterprise domain:
(Instant AP)(config)# internal-domains
(Instant AP)(domain)# domain-name <name>
(Instant AP)(domain)# end
(Instant AP)# commit apply
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Roles and Policies | 201