Concept Guide

3. Click the Monitoring tab. The Monitoring tab details are displayed.
4. Enter the IP address of the TFTP server in the TFTP Dump Server text box.
5. Click OK.
In the CLI
To configure a TFTP server:
(Instant AP)(config)# tftp-dump-server <IP-address>
(Instant AP)(config)# end
(Instant AP)# commit apply
Running Debug Commands from the UI
To run the debugging commands from the UI:
1. Navigate to More>Support at the top right corner of the Instant main window. The Support window is
displayed.
2. Select the required option from the Command drop-down list.
3. Select All Access Points or Instant Access Point(VC) from the Target drop-down list.
4. Click Run. When you run debug commands and click Save, the output of all the selected commands is
displayed in a single page.
The support window allows you to run commands for each access point and virtual controller in a cluster. For a
complete list of commands supported in a particular release train, execute the show support-commands
command at the W-IAP CLI. The output of this command displays the list of support commands that you can
run through the UI and the corresponding CLI commands. For more information on these commands, see the
respective command page in the Dell Networking W-Series Instant CLIReference Guide.
Support Commands
----------------
Description Command Name
----------- ------------
AP Tech Support Dump show tech-support
AP Tech Support Dump Supplemental show tech-support supplemental
AP Provisioning Status show activate status
AP 3G/4G Status show cellular status
AP 802.1X Statistics show ap debug dot1x-statistics
AP Access Rule Table show access-rule-all
AP Inbound Firewall Rules show inbound-firewall-rules
AP Active show aps
AP AirGroup Cache show airgroup cache entries
AP AirGroup CPPM Entries show airgroup cppm entries
AP AirGroup CPPM Servers show airgroup cppm server
AP AirGroup Debug Statistics show airgroup debug statistics
AP AirGroup Servers show airgroup servers verbose
AP AirGroup User show airgroup users verbose
AP ALE Configuration show ale config
AP ALE Status show ale status
AP Allowed Channels show ap allowed-channels
AP Allowed MAX-EIRP show ap allowed-max-EIRP
AP All Supported Timezones show clock timezone all
AP ARM Bandwidth Management show ap arm bandwidth-manageme
AP ARM Channels show arm-channels
AP ARM Configuration show arm config
AP ARM History show ap arm history
AP ARM Neighbors show ap arm neighbors
AP ARM RF Summary show ap arm rf-summary
AP ARM Scan Times show ap arm scan-times
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Monitoring Devices and Logs | 357