Concept Guide

1026| show ap config Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Load aware Scan Threshold
The Load Aware Scan
Threshold is the traffic
throughput level an AP
must reach before it stops
scanning. Load aware
ARM preserves network
resources during periods
of high traffic by
temporarily halting ARM
scanning if the load for the
AP gets too high.
Mode Aware Arm
Shows if the mode-aware
ARM feature has been
enabled or disabled for
this AP. If enabled, ARM
will turn the AP into an Air
Monitors (AMs) if it
detects higher coverage
levels than necessary.
This helps avoid higher
levels of interference on
the WLAN. Although this
setting is disabled by
default, you may want to
enable this feature if your
APs are deployed in close
proximity (e.g. less than
60 feet apart).
Scan mode
Identifies the scan mode
for the AP.
l all-reg-domain: The
AP scans channels
within all regulatory
domains. This is the
default setting.
l reg-domain:Limit the
AP scans to just the
regulatory domain for
that AP.
40 MHz intolerance
The specified setting
allows ARM to determine
if 40 MHz mode of
operation is allowed on
the 5 GHz or 2.4 GHz
frequency band only, on
both frequency bands, or
on neither frequency
band.