Concept Guide

Parameter Description
Honor 40 MHz intolerance
Shows if 40 MHz
intolerance is enabled or
disabled. If enabled, the
radio will stop using the 40
MHz channels if the 40
MHz intolerance
indication is received from
another AP or station.
Legacy station workaround
Shows if interoperability
for misbehaving legacy
stations is enabled or
disabled.
SSID enable
Shows if the SSID is
enabled or disabled
ESSID
Name that uniquely
identifies the Extended
Service Set Identifier
(SSID).
Encryption
Encryption type used on
this AP.
DTIM Interval
Shows the interval, in
milliseconds, between the
sending of Delivery Traffic
Indication Messages
(DTIMs) in the beacon.
This is the maximum
number of beacon cycles
before unacknowledged
network broadcasts are
flushed.
Basic Rates
Lists supported 802.11a
rates, in Mbps, that are
advertised in beacon
frames and probe
responses from this AP.
Transmit Rates
Lists 802.11a rates at
which the AP is allowed to
send data. The actual
transmit rate depends on
what the client is able to
handle, based on
information sent at the
time of association and on
the current error/loss rate
of the client.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap config | 1027