Concept Guide

1040| show ap config Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
VoIP Drop SIP Invite and send status code (client)
Displays the status code
sent to the client when a
SIP Invite is dropped.
l 480: Temporary
Unavailable
l 486: Busy Here
l 503: Service
Unavailable
l none: Don't send SIP
status code
VoIP Drop SIP Invite and send status code (server)
Displays the status code
sent to the server when a
SIP Invite is dropped.
l 480: Temporary
Unavailable
l 486: Busy Here
l 503: Service
Unavailable
l none: Don't send SIP
status code
Related Commands
Command Description Mode
ap system-profile
rf dot11g-radio-profile
rf arm-profile
rf ht-radio-profile
wlan ht-ssid-profile
wlan virtual-ap
wlan voip-cac-profile
The output of the show ap config command
displays the content of the profile settings for an
individual AP or AP group. Use the commands
displayed in the column to the left to configure
these parameters.
Enable and
Config modes
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers