Concept Guide

1048| show ap database Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Command History
Version Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.2 The usb parameter was introduced
ArubaOS 6.4.2.0 The LACP Striping flag was introduced to indicate of the APis configured
with a LACP striping IP address. See ap-lacp-striping-ip on page 167
The output of show ap database long command displays the service tag
of an AP.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers