Concept Guide

show ap debug driver-log
show ap debug driver-log {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>|ip6-addr <ip-
addr>}
Description
Show an AP’s driver logs.
Syntax
Parameter Description
ap-name <ap-name>
Show log information for an AP with a specific name.
bssid <bssid>
Show log information for a specific Basic Service Set Identifier (BSSID). The
Basic Service Set Identifier (BSSID) is usually the AP’s MAC address.
ip-addr <ip-addr>
Show log information for an AP with a specific IP address by entering an IP
address in dotted-decimal format.
ip6-addr <ip-addr>
Show log information for an AP with a specific IPv6 address.
Usage Guidelines
Use this command to review configuration changes made since the AP was last reset.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap debug driver-log | 1098