Concept Guide

show ap debug log
show ap debug log {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}
Description
Show an AP’s debug log.
Syntax
Parameter Description
ap-name <ap-name>
Show log information for an AP with a specific name.
bssid <bssid>
Show log information for a specific Basic Service Set Identifier (BSSID). The
Basic Service Set Identifier (BSSID) is usually the AP’s MAC address.
ip-addr <ip-addr>
Show log information for an AP with a specific IP address by entering an IP
address in dotted-decimal format.
ip6-addr <ip6-addr>
Show log information for an AP with a specific IPv6 address by entering an
IPv6 address in dotted-decimal format.
Usage Guidelines
An AP’s log files show configuration changes since the AP was last reset.
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.3 The ip6-addr parameter was introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap debug log | 1106