Concept Guide

show ap debug shaping-table
show ap debug shaping-table {ap-name <ap-name>|ip-addr <ip-addr>}
Description
Show shaping information for clients associated to an AP.
Syntax
Parameter Description
ap-name <ap-name>
Show shaping table information for a specific AP.
ip-addr <ip-addr>
Show shaping table information for a specific AP IP address by entering its IP
address in dotted-decimal format.
Example
The following command shows the shaping table of an AP named ap22.
(host) #show ap debug shaping-table ap-name ap22
VAP station000
pktin pktout pktdrop pktqd cmn[C:O:H] drop Numcl TotCl BWmgmt
0 0 0 0 0-0-0 0-0 0-0-0 0 0
d1 d2 d3 d4 d5 d6 d7 d8 d9
0 0 0 0 0 0 0 0 0
idx tokens last-t in out drop q tx-t rx-t al-t rate
idx d1 d2 d3 d4 d5 d6 d7 d8 d9
0 0 0 0 0 0 0 0 0 0
VAP station001
pktin pktout pktdrop pktqd cmn[C:O:H] drop Numcl TotCl BWmgmt
0 8144 0 0 0-0-0 0-0 0-2-0 2 0
d1 d2 d3 d4 d5 d6 d7 d8 d9
0 0 0 0 0 0 0 0 0
idx tokens last-t in out drop q tx-t rx-t al-t rate
1 0 0 0 2966 0 0 716 0 0 0
3 0 0 0 31 0 0 8 0 0 0
idx d1 d2 d3 d4 d5 d6 d7 d8 d9
0 0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0 0
The output of this command includes the following information:
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap debug shaping-table | 1141