Concept Guide

show ap ht-rates
show ap ht-rates bssid <bssid>
Description
Show high-throughput rate information for a basic service set (BSS).
Syntax
Parameter Description
bssid <bssid>
Show data for a specific Basic Service Set Identifier (BSSID) on an AP. An AP’s
BSSID is usually the AP’s MAC address.
Examples
The output of this command shows high-throughput rates for each supported MCS value. These values are
applicable to high-throughput (802.11n-capable) APs only.
(host) #show ap ht-rates bssid 00:1a:1e:1e:5a:10
AP "AL12" Radio 0 BSSID 00:1a:1e:1e:5a:10 High-throughput Rates (Mbps)
----------------------------------------------------------------------
MCS Streams 20 MHz 40 MHz 40 MHz SGI
--- ------- ------ ------ ----------
0 1 6.5 13.5 15.0
1 1 13.0 27.0 30.0
2 1 19.5 40.5 45.0
3 1 26.0 54.0 60.0
4 1 39.0 81.0 90.0
5 1 52.0 108.0 120.0
6 1 58.5 121.5 135.0
7 1 65.0 135.0 150.0
8 2 13.0 27.0 30.0
9 2 26.0 54.0 60.0
10 2 39.0 81.0 90.0
11 2 52.0 108.0 120.0
12 2 78.0 162.0 180.0
13 2 104.0 216.0 240.0
14 2 117.0 243.0 270.0
15 2 130.0 270.0 300.0
The output of this command includes the following information:
Column Description
MCS
A Modulation Coding Scheme (MCS) values supported on this high-throughput SSID.
Streams
Number of spatial streams used by the MCS index value.
20 MHz
802.11n data rates for the MCS for 20 Mhz transmissions.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap ht-rates | 1162