Concept Guide

show ap image-preload status
show ap image-preload status
all
list
summary
Description
Display the list of APs that will preload a new version of software from a controller with the AP preload feature
activated.
Syntax
Parameter Description
all
Display the complete status of APimage preload operation.
list
Displays the list of APs and their image preload statuses.
summary
Summarizes the status of APimage preload operation.
Usage Guidelines
Issue this command to display a list of APs in the AP image preload list, and monitor the download status of
each AP.
Example
The example below shows the current status of APs downloading a new image using the AP image preload
feature.
(host) #show ap image-preload status all
AP Image Preload Parameters
---------------------------
Item Value
---- -----
Status Active
Mode All APs
Partition 0
Build 40740
Max Simultaneous Downloads 512
Start Time 2013-11-05 15:38:50
AP Image Preload AP Status Summary
----------------------------------
AP Image Preload State Count
---------------------- -----
Preloaded 1
TOTAL 1
AP Image Preload AP Status
--------------------------
AP Name AP Group AP IP AP Type Preload State Start Time End
Time Failure Count Failure Reason
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap image-preload status | 1165