Concept Guide

show ap mesh-cluster-profile
show ap mesh-cluster-profile [<profile>]
Description
Show configuration settings for a mesh cluster profile.
Syntax
Parameter Description
<profile>
Name of a mesh cluster profile
Usage Guidelines
The command show ap mesh-cluster-profile displays a list of all mesh cluster profiles configured on the
controller, including the number of references to each profile and each profile’s status. Include the optional
<profile> parameter to show detailed settings for an individual mesh cluster profile.
Examples
The example below shows the configuration settings for the mesh cluster profile “meshcluster2”.
(host) #show ap mesh-cluster-profile meshcluster2
Mesh Cluster profile "meshcluster2"
------------------------------
Parameter Value
--------- -----
Cluster Name company-mesh
RF Band a
Encryption opensystem
WPA Hexkey N/A
WPA Passphrase N/A
The output of this command includes the following information:
Parameter Description
Cluster Name
Name of the mesh cluster using this profile
RF band
The RF band in which the AP should operate:
l g = 2.4 GHz
l a = 5 GHz
Encryption
Data encryption setting for the mesh cluster profile.
l opensystem—No authentication and encryption.
l wpa2-psk-aes—WPA2 with AES encryption using a preshared key.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap mesh-cluster-profile | 1187