Concept Guide

Column Description
MPDU Aggregation
Shows if the profile enables or disables MAC
protocol data unit (MPDU) aggregation.
Max received A-MPDU size
Configured maximum size of a received
aggregate MPDU, in bytes.
Max transmitted A-MPDU size
Configured maximum size of a transmitted
aggregate MPDU, in bytes.
Min MPDU start spacing
Configured minimum time between the start
of adjacent MPDUs within an aggregate
MPDU, in microseconds.
Supported MCS set
Displays a list of Modulation Coding Scheme
(MCS) values or ranges of values to be
supported on this SSID. The MCS you choose
determines the channel width (20MHz vs.
40MHz) and the number of spatial streams
used by the mesh node.
Short guard interval in 20 MHz mode
Shows if the profile enables or disables use
of short (400ns) guard interval in 20 MHz
mode.
Short guard interval in 20 MHz mode
Shows if the profile enables or disables use
of short (400ns) guard interval in 40 MHz
mode.
Explicit Transmit Beamforming
Shows if Explicit Transmit Beamforming is
enabled or disabled for W-AP130 Series APs.
NOTE: If this parameter is disabled, the
other transmit beamforming configuration
settings have no effect.
Transmit Beamforming Compressed Steering
When enabled, the AP can use explicit
compressed feedback from clients to obtain
a steering matrix. (For W-AP130 Series APs
only.)
Transmit Beamforming non Compressed Steering
When enabled, the AP can use explicit
noncompressed feedback from clients to
obtain a steering matrix. (For W-AP130
Series only)
Transmit Beamforming delayed feedback support
Shows if the AP has enabled or disabled
delayed feedback/report support in Transmit
Beamforming. (For W-AP130 Series only)
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap mesh-ht-ssid-profile | 1200